Avery Dennison Rewinder - Manual (Page 5)

Manual Rewind Option
06/01 Rev. 2.09 5
Media fixation
characteristics possible reason solution
media moves on core forgotten clamp handle check and fix it
media sticks not to core fix media
core size to wide change core
media moves to inner dancer arm adjust dancer arm
or outer side bent
media guiding wrong adjust guiding
adjusted (ring)
rewind option not fix rewinder to
mounted properly printer
rewind unit is not stepper not plugged in plug in stepper
moving correctly motor
stepper motor defect check and change
stepper
sensor not plugged in check and plug in
characteristics possible reason solution
option board defect check and replace
or not there or insert
sensor wedge not check and adjust
mounted correctly
tooth belt defect check and change
belt tighten loose check and adjust
wrong direction direction programmed check and change
of movement wrong
stepper connection wrong check and change