Awind MobiShow MS‐200 - Manual (Page 3)

MobiShow Quick Installation Guide Awind Inc.
- - 3
3) Hardware Installation
1) Connect power adapter DC plug to MobiShow DC
jack.
2) Connect Projector’s VGA cable to MobiShow VGA connector on the rear
panel.
3) Turn on projector.
4) Turn on MobiShow box
♦ After system ready, the “POWER” LED and “WLAN” LED will be yellow
color. The “LAN” LED will be off.
♦ When LAN connection is established, then “LAN” LED will be yellow
color and blinking while data transmission.
5) When MobiShow is ready, the following screen is shown.
AC plug DC in