Awind WPS-720 User's Manual - Manual (Page 23)

User’s Manual
<
Auto-Configuration Network Setup
>
The default setting of the WPS box is DHCP client. When the WPS box is connected
to a LAN that already has a DHCP server present, the WPS box takes an IP address
assigned to it by the server. When the WPS box is connected to a LAN that does
not have a DHCP server, the WPS box becomes the DHCP server in the network.
< IP Setup>
♦ You can select “obtain IP address automatically” or “Use the following IP
address”
♦ IP Address: The default value is 192.168.100.10.
♦ Subnet Mask: The default value is 255.255.255.0
♦ Default Gateway: The default value is 192.168.100.10
<DHCP Server Setup>
♦ You can select “auto(Enable/Disable DHCP Server” or “Disable”
♦ Start IP: The start IP address of DHCP Server.
♦ End IP: The end IP address of DHCP Server.
< Wireless Setup>
♦ Wireless LAN: you can select “Enable” or “Disable”
- - 23