Awind wePresent WiPG-920 User's Manual - Manual (Page 37)

37
Screen Information
♦ <Disable>: User can see quick guide on splash screen only, server
IP, SSID, login code….won’t be displayed.
♦ <Enable>: Default value, Show server IP, Resolution, Firmware
version, SSID, channel and security on the screen.
♦ <Some Information>: Show server IP and SSID on the screen
only.
5.4.4 Projection Setup
Click [Projection Setup] button
♦ <Resolution>: XGA(1024*768), WXGA(1280x768, 1280x800) and
SVGA(800*600). The default value is XGA.
♦ <Color Depth>: provide wePresent output with 16bit or 32 bit
color depth. It depends on your PC settings.
♦ <Screen Refresh Rate>: This is VGA output refresh rate, provides
60 Hz and 75Hz to suit for different kinds of projectors.
♦ <Login Code>: You can select “Disable”, “Random”, or “Use the
following code” to set a specified 4-characters Number.
♦ <Apply>：Confirmation and Save modifications
♦ <Cancel>: Cancel all the modifications