4 - connector pin assignments – Axel AX4010 Installation Guide User Manual
Page 11
Advertising
Connector Pin Assignments
________________________________________________________________
8
Installation Guide - AX4010 Office Server
4 - CONNECTOR PIN ASSIGNMENTS
This chapter describes the connector pin assignments for the different ports of
the AX4010.
4.1 - ETHERNET PORT 10BT (RJ45)
Recommended wiring is a non-shielded twisted-pair cable (UTP), category 3
or category 5.
RJ-45 connector
(AX4010 rear panel)
Note: the maximum length of a 10BaseT cable is 100 meters (330 feet).
Pin
Signal Name
Direction
1
TX+ (Transmitted Data)
Input
2
TX- (Transmitted Data)
Input
3
RX+ (Received Data)
Output
4
---
---
5
---
---
6
RX- (Received Data)
Output
7
---
---
8
---
---
4.1.1 - AX4010 Connected to a HUB
Advertising