Baby Lock Tiara II (BLTR16-2) Instruction and Reference Guide - Manual (Page 28)

Babylock.com Page 27
Figure 35
Figure 36
Solid beep for 1/3 of a stitch cycle,
no beep for the rest of the cycle.
Main
Diagnostics
Back
Motor
Needle
Speed
Foot Pedal
Main
Diagnostics
Back
Motor Sensor Test
Rotate the hand wheel slowly.
Regular pulsing beeps as you
rotate the hand wheel.
A solid tone or no beeping at all
as you rotate the hand wheel.
Passing Test:
Failing Test:
Diagnostics Screen (Figure 35)
Four different diagnostics tests can be performed on the
machine. These functions test the motor control opera-
tion, the foot pedal and the internal position sensors.
Press the “Main” button to return to the “Main” menu
screen or the “Back” button to return to the “More” menu
screen.
Diagnostics Tests
Motor Sensor Test
The “Motor” Sensor test can help you determine whether
they may be a problem with the Baby Lock Tiara II motor.
Slowly rotating the handwheel should result in an audible
“beep.” If you get a constant solid “beep” or no “beep” at
all, this indicates a failed test and the machine should be
inspected by your authorized Baby Lock retailer.
(Figure 36).
Press the “Main” button to return to the “Main” menu
screen or the “Back” button to return to the “More” menu
screen.
Needle Sensor Test
The Needle Sensor test will indicate whether the nee-
dle position sensor is functioning properly. Rotating the
handwheel should result in a “beep” for half of a stitch
cycle followed by no “beep” for the other half (Figure 37).
If you hear a constant beep or no beep at all for a full 360°
rotation of the handwheel, this indicates a failed test and
the machine should be inspected by your authorized Baby
Lock retailer.
Press the “Main” button to return to the “Main” menu
screen or the “Back” button to return to the “More”
menu screen.
Figure 37
Solid beep for 1/3 of a stitch cycle,
no beep for the rest of the cycle.
Main
Diagnostics
Back
Needle Sensor Test
Rotate the hand wheel.
Solid beep for 1/3 of a stitch cycle,
no beep for the rest of the cycle.
No beep or solid beep as you rotate
the hand wheel one full revolution.
Passing Test:
Failing Test: