Baby Lock Tiara II (BLTR16-2) Instruction and Reference Guide - Manual (Page 8)

Babylock.com Page 7
Safety Section Quick Facts
This device complies with Part 15 of the FCC Rules. Op-
eration is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Please note: Do not operate your Baby Lock Tiara II quilt-
ing machine until you have completely read the informa-
tion contained in this manual. Please keep all packaging
and order information for warranty purposes.
1. The Baby Lock Tiara II is very heavy. Never attempt
to lift it alone – always use two people when lifting.
2. Always unplug the Baby Lock Tiara II from the
electrical outlet when performing any maintenance,
changing the needle, removing thread locks, or when
left unattended.
3. Keep fingers away from all moving parts. Use caution
around the needle or sharp external components.
4. Change the needle often. Do not use bent or dull
needles. “Every quilt deserves a new needle”.
5. Switch the power off when making any adjustments
in the needle or bobbin area, such as threading the
needle, installing the bobbin case, or when oiling or
cleaning.
6. Never drop or insert foreign objects into any
opening.
7. The Baby Lock Tiara II should only be used indoors;
away from moisture.
8. The Baby Lock Tiara II should not be stored or used
in extreme temperatures.
9. Use the Baby Lock Tiara II only for its intended use
as described in this manual.
10. Use only attachments recommended by the manufac-
turer.
11. To disconnect from the wall outlet, push the switch
to the off position, then remove the plug from outlet
pulling from the plug, not the cord. Never operate
the Baby Lock Tiara II if the cord is damaged or not
working correctly. If a mechanical or electrical prob-
lem is encountered, return the Baby Lock Tiara II to
your authorized Baby Lock retailer for examination,
repair, electrical or mechanical adjustment.
The Baby Lock Tiara II utilizes high-tech electron-
ics and an innovative touch screen to offer greater
functionality and ease of operation to home quilters
than ever before conceived in the quilting industry.
The Baby Lock Tiara II quilting machine is a high
quality machine that incorporates very robust design
features and is very easy to service.
Disclaimer
Baby Lock and its authorized retailers are in no way
legally responsible or liable for damage to the Baby Lock
Tiara II when used improperly or not in accordance with
the guidelines stated in this manual or when used on
home machine quilting tables not recommended by
Baby Lock.
Throat Dimensions: 8.25” X 16”
(245mm X 610mm)
Quilting Speed: Maximum: 1500 SPM
Needle System: 134 (135 X 7)
Needle Sizes: 12/80 - 20/125
Hook System: Rotary, Vertical,
M-class bobbin
Bobbin Type: Aluminum, Class M
Bobbin Case: Type MF
Motor Type: Brushless DC
Needle Positioning: Up and down, tie-off stitch
Electrical Power: 90 – 264 VAC, 47-63Hz,
300W peak
LED Power Consumption: 2.25W
Hopping Foot Stroke/Lift: 5mm
Needle Bar Stroke: 35.3mm
Take-Up Stroke: 73mm
Lubrication,
main components: Kluber Lube, permanent
Lubrication of hook: Velocite 10, Texaco 22