Baby Lock Diana (BL480A) Instruction and Reference Guide - Manual (Page 66)

Light cover screw
Replace Remove
Replace Remove
65
Light bulb is available at your local retailer. Take old bulb to the
retailer and ask for same bulb.
If voltage indicated on the electrical rating plate of your machine is
120V, ask for light bulb conforming to following specification.
- Bayonet type: 110~120V, 15W
Glass shape: T-20
Lamp cap: E12
Overall length: 48mm
Remove light cover screw then while pushing the cover lightly
to the rear, swing cover to the left and remove from machine
as shown in the illustration. Turn bulb to the left to remove. To
replace the bulb, push bulb into the socket and turn to the right.
If voltage indicated on the electrical rating plate of your machine
is 220-240V, ask for light bulb conforming to following specification.
-Edison type (screw type): 220 ~240V, 15W
Glass shape: T-22
Lamp cap: E14
Overall length: 56mm
Remove light cover screw then while pushing the cover lightly to
the rear, swing cover to the left and remove from machine as
shown in the illustration. Turn bulb to the left to remove. To
replace the bulb, screw bulb into the socket and turn to the right.
Danger: Always unplug before re-lamping.
Caution: Be sure the light bulb has cooled off before
changing with a new one.
Warning:
Replace the light cover first before connecting
the power line plug.
How to Change Light Bulb
1
1