Babycare TENS Elle TENS - Manual (Page 8)

5
Setting Up Your Elle TENS
Check the following contents:
• 1 x Elle TENS unit
• 1 x Pack of 4 self adhesive electrodes
(40mm x 100mm)
• 3 x Leadwires (2 for use and 1 spare)
• 4 x AA batteries (2 for use and 2 spare)
• 1 x Carrying pouch
• 1 x Easy-release neck cord
• 1 x Instruction manual
• 1 x Women’s Guide to Drug Free Pain
Relief (if you have purchased this unit)
The Assembly Stage
a) Press and rotate the belt clip at the
back of the Elle TENS in either direction to
reveal the battery compartment (see fig 1,
page 6).
b) Release the battery compartment
cover and insert 2 x AA batteries (see fig
2, page 6), ensuring the positive (+) and
negative (-) terminals are correctly
positioned as marked in the battery
compartment. Replace the cover.
c) Take two of the purple leadwires and
insert each of the black jack plugs (at one
end of each leadwire) into the sockets at
the top of the Elle TENS unit (see fig 3,
page 6).
d) Now insert the pins (at the other end of
the leadwires) into the sockets attached to
the sticky electrodes. Do not remove the
electrodes from the backing at this stage
(see fig 4, page 6).
NB. Each leadwire has a red and black
pin. It makes NO difference whatsoever
which electrode they are attached to!
e) If you wish, attach the easy-release
neck cord which enables you to hang the
Elle TENS from your neck whilst in labour
(see fig 5, page 6).