Basler Electric BE1-79A - Manual (Page 6)

iv BE1-79A Introduction 9310200990 Rev J
Manual
Revision and Date Change
H, 07/10
 Expanded Table 1-1, BE1-79A Versions and Features.
 Revised rating for output contacts under Specifications in Section 1.
 Added GOST-R statement in Section 1.
G, 02/08  Added manual part number and revision to footers.
 Updated Output Contact ratings in Section 1.
 Updated Lockout description in Section 3 to support version 1.07
firmware.
 Updated Command Descriptions in Section 4 to support version 1.07
firmware.
F, 10/05  Added switch S4 labels to Figure 2-3.
 In Figures 3-1, 6-1, and 6-2, enhanced C8 function block illustration to
show NO or NC contact selectable by switch S5. Changed C10 from
NC to NO.
 Added RS Mode Selector switch illustration and corrected shorting
bars placement in Figures 3-2 and 3-3.
 Changed name of Section 4 from Communication to Communication
Commands.
 Changed name of Section 5 from Installation to Installation and
Configuration.
 Corrected and clarified connection drawings of Figures 5-4 and 5-5.
 Added troubleshooting tips to Section 6.
 Moved contents of Section 7 to Section 1 and deleted Section 7.
 Added Appendix A, RS Contact Application.
 Added Appendix B, Terminal Communication.
E, 04/03  Added information pertaining to part number 9310200201.
 Clarified the weight specification in Section 1.
 Corrected error in Figure 5-4.
D, 08/00  Covered addition of RS Contact Switch S5 and changes to SP-
79ARS command.
C, 01/00
 Information pertaining to the jumper-selectable contact sensing
voltage ranges was added. Drawings in Figure 5-1 were changed to
show the revised relay case cover.
B, 05/98
 Patent information was added to Section 1. Various errors in Sections
1, 3, and 6 were corrected.
A, 09/97  Information pertaining to the power supply holdup feature was added.
―, 07/97  Initial release