Baumatic BHI300 User Manual
Page 11
11
Control panel layout
1. ON/OFF
button
2.
Power / timer plus and minus buttons
3.
Heating zone selection buttons
4.
Timer button
5.
Safety lock button
Using the ceramic hob
Before first use
IMPORTANT: You should clean the ceramic hob surface (see
“Cleaning and maintenance” section).
o
You should switch on one cooking zone at a time, for 5 minutes
at the maximum setting. This will help to eliminate any new
smell that exists and evaporate any humidity that has formed on
the heating elements during transit.
o
Do not burn off more than one zone at once.
o
You must place a saucepan filled half full with cold water on
each zone as you burn it off. Otherwise the induction zone will
not operate.
Touch controls
o
All operations are performed by means of the touch controls that
can be found on the control panel. The controls respond to touch
so you don’t need to apply any pressure.
o
A beep will sound each time a touch is registered.
o
Take care to ensure the controls are always clean and dry and
that there are no objects such as utensils and cloths covering