BayTech DS71-MD4 Reset Procedures - Manual

DS71-MD4 Reset Procedure
Use paper clip
Press button
LINE
CX OH CD RD TD
EIA-232
1. Press and hold reset button as you power cycle the module.
2. Continue to hold button for 45 seconds, then release button.
3. Use Terminal program into the serial port if not already doing so.
4. If no opening menu, Type 5 semi-colons.
5. If appears not to work repeat reset procedure except hold button for 60 seconds.
Any questions or concerns arising from this procedure should be directed to the BayTech support
team at:
[email protected]
Bay Technical Associates
5236 A Avenue
Long Beach, MS 39560
Domestic: 800.523.2702
International: 228.563.7335
Support Document 1 10/24/2006
DS71-MD4 Reset Procedure