BDI 4961 Jazz - Manual

Designed by Mark Palmquist
‘Jazz’ is a trademark of Becker Designed, Inc.
All rights reserved. ©2011 Becker Designed, Inc.
4961 052411v3
Jazz
4961
Placement and Maintenance
Jazz is designed for indoor use. Clean mirror with glass
cleaner.
To hang your mirror at BDI’s suggested height carefully
follow this procedure to prevent any damage. The
measurements shown indicate nail locations on the wall
for single or multiple configurations. Adjust hanging
dimensions as need to hang at a different height.
Single Configuration
Determine the desired height for the mirror. At 6.25"
below the desired top of the mirror make two marks with
a pencil, 23" apart. Make sure your marks are level then
install supplied hangers. Verify that hangers are level and
hang mirror from brackets.
Multiple Configurations
Follow dimensions shown on drawing.
h a n g i n g i n s t r u c t i o n s
bdiusa
.
com customerservice
@
bdiusa
.
com
3"
1"
69" (To Floor)
75" (To Floor)
8" 23" 23"