Beisler 739-23-1 Installation Manual - Manual (Page 7)

3.5 Installation of suction unit
The suction unit consists of a waste bin 1, the vacuum valve 2, the
suction hose 3 and the vacuum hose 4. The device ensures that
cut-offs are constantly removed from the edge cutter.
The suction unit is equipped with adapters for connection to the
vacuum unit in the premises. If there is no such unit, install the
centrifugal blower 10, which is available as an optional device.
–
Place waste bin 1 behind the sewing unit.
– Push suction hose 3 onto the suction connectors below the table
top.
– Connect the other end of the suction hose 5 to the socket 6 of the
waste bin.
– Insert vacuum hose 4 into the socket 7 and connect the other end
of the hose to the internal vacuum unit or a centrifugal blower.
– Connect control hose 9 to pneumatic cylinder 8.
2-7
4 3 2 1 4 7 9 8 6
3 5
10