Beurer FWM 50 User Manual

Page 10

Advertising
background image

10

• This foot warmer must not be used by young children (3 – 8 years old)

unless the controller has been set by a parent or responsible adult
and the child has been given adequate instructions on how to use the
foot warmer safely.

• This foot warmer may be used by children over the age of 8 and by

people with reduced physical, sensory or mental skills or a lack of
experience or knowledge, provided that they are supervised and
have been instructed on how to use the foot warmer safely, and are
fully aware of the consequent risks of use.

• Children must not play with the foot warmer.
• Cleaning and user maintenance must not be performed by children

unless supervised.

• This foot warmer is not designed for use in hospitals.
• This foot warmer must not be used to keep animals warm.
• Do not use this foot warmer with shoes.
• Do not insert needles.
• Only use in dry rooms.
• Use only the original mains part provided

Type: S024FV 1200 200.

• The electrical and magnetic fields emitted by this foot warmer may

interfere with the function of a pacemaker. However, they are still well
within the limits: electrical field strength: max. 5000 V/m, magnetic
field strength: max. 80 A/m, magnetic flux density: max. 0.1 millitesla.

Please consult your doctor and the manufacturer of your pacemaker

before using this foot warmer.

• Do not pull, twist or make sharp bends in the cables.
• Please check this foot warmer frequently for signs of wear and tear or

damage.

If any such signs are evident, if the foot warmer has been used

incorrectly or if it no longer heats up, it must be checked by the
manufacturer before being switched on again.

• If the cable of the foot warmer is damaged, it must be replaced by

the manufacturer, its customer service department or a similarly
qualified person to avoid any risk.

• Always observe the notes on operation (section 5), cleaning and

maintenance (section 6) and storage (section 7).

• If you should have any questions about using our devices, please

contact Customer Services.

Advertising