Beurer HK 48 Cosy - Manual (Page 14)

14
IMPORtANt
Please note that the cover with integrated heating pad must not be dry cleaned, wrung out, tumble
dried, put through a mangle or ironed.
Immediately after washing, reshape the cover with integrated heating pad to its original dimensions
while it is still damp and spread it out flat on a clothes horse to dry.
IMPORtANt
• Do not use pegs or similar items to attach the cover with integrated heating pad to the
clothes horse. Failure to observe this may result in damage to the item.
• Do not reconnect the controller to the heating pad until the cover with integrated heating pad, the
plug-in connector and the inner pad are completely dry. Otherwise there is a risk of electric shock.
Fit the inner pad back into the cover with integrated heating pad.
WARNING
• Never switch the heating pad on to dry it! Otherwise there is a risk of electric shock.
6. storage
If you do not plan to use the heating pad for a long period of time, we recommend that you store it in the
original packaging.
cAutION
Please allow the heating pad to cool down before storing. Otherwise the heating pad may be damaged.
To avoid sharp folds in the heating pad, do not place any objects on top of it while it is being stored.
7. Disposal
Please dispose of the heating pad in accordance with Directive on Waste Electrical and Electronic
Equipment (WEEE). In case of queries, please contact the
municipal authorities responsible for waste disposal in your area.
8. What if there are problems?
Problem cause solution
The temperature settings are not illuminated while
- the controller is properly connected to the heating pad;
- the mains plug is connected to a working socket;
- the sliding switch is set to 1, 2 or 3.
The safety system has
switched the heating
pad off permanently.
Send the heating pad
and the controller for
servicing.
9. technical data
See the rating label on the heating pad.