Care and storage – Beurer MG 155 User Manual
Page 13
13
7. Care and storage
CLEanIng
WARNING
• Disconnect the device before cleaning it.
• Only clean the appliance in the manner specified. Fluid must never be allowed to enter into the
device or accessories.
• Do not use the device again until it is completely dry.
First unplug the device and allow it to cool off. Then you can clean it with a cloth which is no more than lightly
moistened. You can also use a mild detergent.
Storage
• Keep the massage device in a cool and dry place where it is out of the reach of children. We recommend
storing the device in its original packaging.
• Avoid any contact with sharp or pointed objects which could damage the device or cover.
8. In the event of problems
Problem
Cause
Remedy
The device is
very loud during
massage.
The seat cover is not fully in
contact with the base.
Ensure that the seat cover is supported over its
entire area.
Massage stopped. The preset maximum period
of operation has elapsed.
Let the device cool down for at least 15 min.
before using again. Switch the device on again.
The connection to the mains
has been interrupted.
Check the plug connection and the contact of the
mains plug with the mains supply.
No massage.
Appliance not connected to
the mains power supply.
Make all connections and switch on the device.
Device not switched on.
Turn the device on using and activate the mas-
sage using buttons 2 – 4.