Beurer MG 215 - Manual (Page 11)

11
hand switch
1 Button
2 Timer button (5-10-15 minutes)
3 Demo button
4 Shiatsu button (shiatsu massage)
5 Height adjustment button (shiatsu massage unit)
6 Heat button (heating)
7 Left button (anti-clockwise rotation)
8 Right button (clockwise rotation)
9 Soft button (speed setting 1)
10 Strong button (speed setting 2)
6. Start-up
CAUTION
• Fasten the protective cover to the surface of the Shiatsu seat cover with the Velcro straps. It is also
possible to massage without the protective cover; this is generally found to be “harder”.
• Position the seat cover upright on a suitable seating arrangement with seating surface and backrest
(chair, sofa, or similar).
• Use the flexible fastening straps and Velcro strips to secure the Shiatsu seat cover.
• Connect the device to the mains by plugging the plug into the socket.
7. Operation
Gently press your back against the massage device to start with. Then make sure that you are in a comfort-
able position before gradually shifting your weight onto the massage device.The massage must be pleasant
and relaxing at all times. Stop the massage or change your position or the contact pressure if you find it is
painful or unpleasant.
CAUTION
• Do not force any part of your body, in particular your fingers, between the rotating massage
heads and their mountings in the device.
• Sit comfortably and upright on the seat cover. Ensure you sit centered and such that the massage
heads can move to the left and right of your spinal column.
• Switch on the massager with the button.
The device starts automatically with the Shiatsu massage (anti-clockwise rotation, speed
setting 1).
1
2
3
4
7
5
5
6
8
9
10