Care and storage – Beurer MG 260 User Manual

Page 15

Advertising
background image

15

When the massage type (Shiatsu or rolling massage) is changed, the preselected region (full, upper, lower

back) is retained. Note that the massage region must be selected again when switching from localised

Shiatsu massage to rolling massage.

5. Heating function

Press the heat button to switch on the heating function of the massage heads. The blue lights in the mas-

sage heads change colour to red.

• Do not use the massage device for longer than 15 minutes and then allow it to cool. Using the device

for longer can over-stimulate the muscles and cause tension instead of relaxation. The massage can be

finished at any time by pressing the button. Please note that on switching off, the massage heads first

return to the starting position at the lumbar region. This is indicated by the LED flashing. Once this position

is reached, the device switches off.

• If the device is stopped be pressing a massage area button twice, it also returns to the starting position

after 15 minutes and then switches off.

• Do not disconnect the device from the mains supply during operation. Always switch it off first and wait

until it has returned to the initial position.

note

• The device has an automatic shut-off mechanism set to a maximum operating period of 15 minutes.

8. Care and storage

Cleaning

WarnInG

• Disconnect the device before cleaning it.

• Only clean the appliance in the manner specified. Fluid must never be allowed to enter into the

device or accessories.

• Smaller stains can be removed using a cloth or moist sponge together with a little liquid detergent

for delicate fabrics if necessary. Do not use any cleaning agents containing solvents.

• The removable covers are machine-washable at 40 °C. Please note the symbols for care and

cleaning on the label sewn into the cover.

The velour cover to the rear is secured with a Velcro fastening under the material bearing the beurer

logo and can be removed from there.

The cover for the neck area can be removed using the zip at the side of the control knob for the

height-adjustable neck massage.

• Do not use the device again until it is completely dry.

Storage

If you do not use the device for longer periods, we recommend storing it in the original packaging in a dry

place without weighting it down.

Alternatively, you can hang the device in a wardrobe with a coat hanger. To do so, the coat hanger must be

threaded through the hanging loops on the rear side of the device.

CauTIOn

• If you use the transport lock screws, take care to remove these before starting the device when you

next use it.

Advertising
This manual is related to the following products: