Beurer MG 55 - Manual (Page 11)

11
7. care and storage
cleaning
First unplug the device and allow it to cool off. Then you can clean it with a cloth which is no more than lightly
moistened. You can also use a mild detergent.
WARNING
• Disconnect the device before cleaning it.
• Only clean the appliance in the manner specified. Fluid must never be allowed to enter into the
device or accessories.
• Do not use the device again until it is completely dry.
storage
Keep the massage device in a cool and dry place where it is out of the reach of children. We recommend
storing the device in its original packaging.
8. In the event of problems?
Problem cause Remedy
Massage head does
not move.
Appliance not connected
to the power supply. Connect the plug to the mains supply and
switch on the appliance.
Device is not does not move. Switch on the appliance.
Overheating protection
tripped.
Disconnect device from mains power, wait at
least 15 minutes, plug in again and switch on.
9. technical data
Dimensions (W/H/D) ~ 95/445/95 mm
Weight ~ 1000 g
Rated output 20 W
Rated voltage 220-240 V ~ 50/60 Hz