Storage, Disposal, What if there are problems – Beurer TL 60 User Manual

Page 14: Technical specifications

Advertising
background image

14

9. Storage

If you are not going to use the device for an extended period of time, disconnect it and store it in a dry place, out

of the reach of children.

10. Disposal

In the interest of protecting the environment, the unit must not be thrown out with the household

waste at the end of its service life. Dispose of the unit at a suitable local collection or recycling point.

Dispose of the device in accordance with EC Directive 2002/96/EC – WEEE (Waste Electrical and

Electronic Equipment). If you have any questions, please contact the local authorities responsible for

waste disposal.

11. What if there are problems?

Problem

Possible cause

Solution

Device does not

light up

On/off button switched off

Switch on the on/off button.

No electricity

Connect the mains plug correctly.

No electricity

The mains cable is defective. Contact

customer services or your retailer.

The fluorescent tube is not correctly inserted

Insert the fluorescent tube correctly

(Chapter 8).

Fluorescent tube has reached the end of its

service life. Fluorescent tube is defective.

Replace the fluorescent tube

(Chapter 8).

12. Technical specifications

Dimensions (WHD)

340 x 480 x 80 mm

Weight

2.625 kg

Lighting elements

2 x 36 W tubes (2G 11), Daylight

Nominal data for replacement

lighting elements

Philips 2G 11, 36 W,

Osram/Dulux 2G 11, 36 W

Nominal data for starter

AC 220 – 240 V, 4 to 65 W

Power

72 watts

Light intensity

10.000 lux (15 - 20 cm)

Radiation

Output of radiation beyond the visible spectrum (infrared and UV) is

so low that it is harmless to eyes and skin.

Mains connection

230 V ~, 50 Hz

Degree of efficiency of the ballast

~ 80%

Source effiency (lm/W) of the bulb

67 lm/W

Color temperature of tubes

6.500 Kelvin

Subject to technical modifications.

Advertising