Beurer WL 30 - Manual (Page 13)

13
Note The time set will only appear on the device if the “setting the time” process has been
completed in full.
setting and activating the alarm
• Press the alarm control button.
The hour setting will flash on the display.
• To set the hour, move the alarm control button up or down. Confirm by pressing
the alarm control button.
The minute setting will flash on the display.
• To set the minute, move the alarm control button up or down. Confirm by press-
ing the alarm control button.
One of the alarm sound symbols will flash on the display.
You can choose between four natural sounds (birdsong, frog croak, rain shower or
wind), the radio and a beep as the alarm sound.
• To select the alarm sound, move the alarm control button up or down. Confirm by
pressing the alarm control button.
The volume setting for the alarm will appear on the display.
• To set the alarm volume, move the volume control button up or down Confirm by
pressing the alarm control button.
A number will flash on the display. This number indicates the period of time (in
minutes) before the wake-up time over which the light will gradually start to become
brighter (simulated sunrise). The sunrise duration can be set to 15, 20, 40, 60, 80,
100 or 120 minutes.
• To set the sunrise duration, move the alarm control button up or down. Confirm
by pressing the alarm control button.
The light symbol will flash on the display.
• You can move the alarm control button up or down to switch the sunrise function
on or off. Confirm by pressing the alarm control button.
If you have switched the sunrise function on, the light intensity setting will appear on
the display.
• To set the sunrise brightness, move the light control button up or down. Confirm
by pressing the alarm control button.
The alarm symbol will flash on the display.
• To activate the alarm, press the alarm control button.
Deactivating the alarm
Note To deactivate the alarm, press the alarm control button eight times. The alarm symbol will
appear on the display. Move the alarm control button down (the alarm symbol will disappear)
and confirm by pressing the alarm control button.
snooze function
When the alarm goes off, you can stop it temporarily by pressing the snooze button. The alarm will then
go off again ten minutes later. To switch off the alarm clock for 24 hours, press any button on the device.