Bladez Fitness Master GS Indoor Cycle User Manual
Page 13
Advertising
13
STEP 1
ASSEMBLE FRONT AND REAR
Detach the shipping supports (metal pieces attached with 2 screws) – under the front
and rear stabilizers. Discard the supports and screws.
Follow the figure below and attach the Front Stabilizer (8) and Rear Stabilizer (7)
under the Main Frame (1) with 4 pcs of Button Head Hex Socket Bolts (34),
4 pcs of Flat Washer (33) by using the supplied Allen wrench for fastening.
STEP 2
INSTALL LEFT AND RIGHT PEDALS
Refer to the figure on right, thread the
Left Pedal (35-L) and Right One (35-R)
into the Cranks. Tighten them with Open
Wrench #15. Tighten in counter clockwise
direction for left pedal and clockwise
direction for right pedal.
Advertising
This manual is related to the following products: