Bladez Fitness Master GS Indoor Cycle - Manual (Page 17)

17
STEP 8
SAFETY INSPECTION
Before finishing installation, please inspect all the screws and nuts carefully to make
sure all of them tightened.
NOTICE
1. Inspect all the Nuts, Nut Caps and Pedals and re-tighten as needed regularly and
inspect the equipment periodically. Should you find any defective parts, replace them
immediately. Don’t exercise until they are repaired.
2. Pay more attention to normal wear on parts. As in the following figure, please
inspect the Leather Brake pad (24) to make sure that it is in good working condition
before exercise. If it is not, please replace it.