Blu Bathworks SA0110 User Manual
Page 4
Advertising
1 866 907 0122 blubathworks.com
2014-01
®
3
4
5
• Place the basin into position.
• Check to make sure that the basin is centered on
the vanity top and verify the fit.
• Adjust the cut-out, if necessary.
• Install the faucet.
• Having confirmed that the basin fits into place, turn the
basin upside down and apply a generous portion of
silicone on the underside of the rim, close to the edge.
• Place the basin into position and press down firmly.
• Trim off any excess silicone with a putty knife.
• Connect all of the final plumbing.
• Run water to the lav to check for leaks.
6
Advertising