Blu Bathworks TEP421 - Manual (Page 3)

2014-01
1 866 907 0122 blubathworks.com
®
2
INSTALLATION
1) Spout Base
• Insert the spout holder in the deck mount hole.
• Screw the upper and bottom flange to the spout holder. See drawing below.
• Screw the flexible pipe of the spout outlet. Remember to use the gaskets supplied.
2) Handshower Connection
• Insert the hand shower connection in the deck mount hole.
• Screw the upper and bottom flange to fit the hand shower
connection. See drawing below.
Note: A perfectly clean surface is recommended to facilitate flexible pipe and spring return.
25mm