Blu Bathworks TEP421 - Manual (Page 5)

2014-01
1 866 907 0122 blubathworks.com
®
4
• Prepare the tub to take the control fixing brackets. 35mm/1 ⅜" diameter holes are required
to fit the brackets.
• Feed the control data cables through the holes, then insert the control brackets.
‘O’ ring
4) Control Wheel Installation
• Unscrew and remove the nut and washer from the control brackets and data cables.
• Carefully pull the ‘front’ control wheel off the controls, taking care not to mix them up.