Blu Bathworks TEP131 - Manual (Page 5)

2013-12
1 866 907 0122 blubathworks.com
®
4
INSTALLATION STEP 2
• Position the O-ring (2) in its site on the nut (1).
• Screw the nut (1), as per drawing (A), on the threaded rod(3).
• Place the O-ring (4) on its site on the nut (5).
• Screw the nut (5), as shown in the drawing (A), on the mixer body
(6).
• Once the correct position of the rings is reached, tighten the nuts
located under the wash basin mixer to fix the rod and the mixer
body.
• (A)
INSTALLATION STEP 3
• Place the two small cover plates (1)
• Place the O-ring (2) and screw the cap (3) to secure the cover plate
of the mixer body.
INSTALLATION STEP 3
• Place the one small cover plate (1)
INSTALLATION STEP 4
• Place the O-ring (1) and the spout (2).
• Fix the spout with the grub screw (3).
INSTALLATION STEP 4
• Place the control handle (1) and fix it with the grub screw (2).
• Screw the lever (3) on the control handle.
• Place the O-ring (4) and the spout (5).
• Fix the spout with the grub screw (6).
INSTALLATION STEP 1
• Before installation drill two holes, mmØ27 / inØ1,06 for the spout and
mmØ46 / inØ1,81 for the body mixer.
• Screw the nut (1) on the body mixer (3) and place the metal ring
(2).
• Screw the nut (4) on the threaded rod (6) and place the small
metal ring (5).
1
2
3