Installation step 7, Installation step 8 – Blu Bathworks TEP131 User Manual
Page 7
Advertising
2013-12
1 866 907 0122 blubathworks.com
®
6
INSTALLATION STEP 7
•
Feed the washer and nut onto the control data cables.
•
Hand tighten onto the control bracket bodies. Help may be required at this stage.
•
Push fit the ‘front’ control wheels onto the controls.
INSTALLATION STEP 8
•
If required the control bodies can be removed from the control brackets by pulling off the
front control wheel, turning the control bodies counter-clockwise and lifting out.
•
To refit, position the control bodies in the slots and turn clockwise.
Advertising
See also other documents in the category Blu Bathworks For Home:
- BEP002 (7 pages)
- BCM4214 (6 pages)
- BCA971M (9 pages)
- BCA141MR (10 pages)
- BCT180 (6 pages)
- SA1810 (6 pages)
- BCS14N (10 pages)
- BCS18N (10 pages)
- BT8004B168 (10 pages)
- BT0408 (8 pages)
- BCZ915C X2 (13 pages)
- SA2018B (4 pages)
- SA1018C (4 pages)
- SB9250 (10 pages)
- SA3023 (5 pages)
- SA0208 (6 pages)
- SA0110 (7 pages)
- SA0507 (5 pages)
- LSeat-006 (12 pages)
- LF8004 (14 pages)
- LW6030 (11 pages)
- LB9030 (6 pages)
- TSP611 (7 pages)
- TSU611 (7 pages)
- TF500 (6 pages)
- TF800 (6 pages)
- TF514 (9 pages)
- TF260 (9 pages)
- TSP511 (11 pages)
- TSU510 (10 pages)
- TSP421 (15 pages)
- TEP421 (20 pages)
- TSU431 (11 pages)
- TEE200 (19 pages)
- TSP101 (7 pages)
- TSU140 (13 pages)
- TEU131 (17 pages)
- TSP141 (9 pages)
- TSP131 (10 pages)
- TSU101 (7 pages)
- TSU131 (10 pages)
- TSU141 (9 pages)
- TSP211 (6 pages)
- TSU211 (6 pages)