Bluelab Soil pH Pen - Manual (Page 2)

English
2
Features
Direct pH and temperature
measurements from soils/media
Selectable units for temperature
Automatic Temperature Compensation (ATC)
Backlit LCD display Low battery indicator
Hold reading function Fully waterproof
Integrated storage cap/dibber Auto off function
Successful pH calibration indicator Fully guaranteed for 1 year
Power button / hold
Short press to turn on. Short press to hold and
unhold reading. Long press to turn off.
Calibrate button
See calibration section.
Units button
Press and hold until units fl ash then short press to
change units. Screen will change back to main display
when no buttons have been pressed for 4 seconds.
Quick guide
Low battery warning
Appears when batteries are low.
Check mark/tick to
indicate successful
pH calibration
Disappears 30 days after
last successful calibration
as a reminder calibration
is due.
Storage cap/dibber
Create a pathway in the soil/media before taking a
measurement with the pH probe. Use to store the pH
probe tip, to keep it wet at all times.
If it dries, it dies!
Keep your probe tip wet at all times to avoid
permanent damage. Refer to section 4.0
FRAGILE Glassware
The pH probe contains a glass tube and a glass bulb.
DO NOT drop, knock or bend. Refer to section 4.0
Always loosen the cap!
Check for the gap. Always loosen the cap before removing
or placing on the pH probe tip. Refer to section 2.0
ATTENTION: