Bolide SVR9000s MO - Manual (Page 14)

User Manual
11
Chapter 4 Starting the system
4.1 System Initialization
4.2 Main Interface
Picture 4-2
In main interface mode, if you click 1, 2, 3 or 4 on the Remote Controller, the CH1,2,3 or 4 will be
maximized to full screen, by clicking All or 5 again, the display will be returned back to 4-split mode.
Clicking [SEL] button on the Remote Controller will pop up Context Sensitive Menu; by clicking [Up/Down]
button, you can select menu items; when clicking [SEL/MENU] button again, you will exit the Context-Sensitive
menu.
Note: If DVR is not connected to Hard Driver, “H” Character will appear in the screen, MDVR will automatically
restart after two minutes under the default mode. If you want to close the [Auto restart after two minutes] function,
please refer to Section 5.2.5.1 – HD management.
Connect the power cable of DVR to power supply and press the
[Power] button, you will see the initialization screen shown as below
4-1.
After finishing the initialization processing, system will enter into
Main interface screen. Picture 4-2 is the main interface defaulted by
system, which is showing no video input status. Once there are video
inputs, the interface will display live images from the cameras.
Picture 4-1