Bolide SVR8000s - Manual (Page 59)

SVR-8000S User’s Manual
59
Configuring Network Settings
Network settings must be configured before you’re able to use your DVR over the network.
Configuring Basic Settings
To configure basic network settings:
1. Enter the Network Settings menu, shown in Figure 1 by clicking Menu > Setting > Network.
Figure 1. Network Settings Menu
2. Select the General tab.
3. If you have a DHCP server running and would like your DVR to automatically obtain an IP address
and other network settings from that server, check the DHCP checkbox. You may check the DHCP
status by going to the Network Status tab, as shown in Figure 2.
Figure 2. Network Status