Broadata Communications 1100E Series - Manual (Page 14)

BCI 1100E User’s Manual
Fiber Optic HD-SDI Digital Video Transport System
Broadata Technical Support, [email protected] 15
a. Check to see that the attached user equipment is turned
on.
b. Both ends of the link are connected to the corresponding
equipment and to the same corresponding channel port.
c. Cable connections at both the video/audio channels are
securely fastened to each connector. Turn the power off,
then back on to reset the link.
d. Output levels of the user’s video and audio sources are not
above the allowed input levels of the 1100E units (see
Section 5.0 Specifications).