Broadata Communications 300E Series - Manual (Page 6)

BCI 300E User’s Manual
Multiple Channel Video/Audio/Data Transmission System
Broadata Technical Support, [email protected] 7
2.0 SETUP
The BCI 300E Series units are used in pairs. In a unidirectional system,
one 310E transmitter is located at the near-end and connected to a
310E receiver located at the far-end, through a single fiber. In a
bi-directional system, one 300E transceiver unit is located at the near-end
and connected through two optical fibers to an identical 300E transceiver
located at the far-end of the link. Each unit provides a separate electrical
interface connector for the various audio, video and data signals.
Connections are one to one between the two units. Figure 2-1 depicts
two typical installations.
Figure 2-1
310E/320E Setup