66 troubleshooting your projector – Dell 1610HD User Manual
Page 66
Advertising
66
Troubleshooting Your Projector
Lamp failure
Lamp is defective. Replace the lamp.
OFF
OFF
OFF
OFF
AMBER
Fault - DC
supply (+12V)
Power supply has been interrupted. The
projector automatically shuts down.
Unplug the power cord after three
minutes and then turn on the projector. If
this problem persists, contact Dell.
AMBER
Flashing
OFF
OFF
AMBER
AMBER
Lamp module
connection
failed
Lamp module connection may be
disrupted. Check the lamp module and
ensure that it is properly installed. If the
problem persists, contact Dell.
OFF
OFF
OFF
OFF
AMBER
Flashing
Advertising