BUG-O Systems AGS-4000 - Manual (Page 18)

18
DIGITAL READOUT CALIBRATION
Internal Control Module adjustments enable the user to change between the factory-set in/min
(120 VAC) and cm/min (240 VAC). The display can also be recalibrated, if required, to give an
accurate speed readout.
STEP 1: Remove endplate
STEP 2: Set Switch 1 & 2
STEP 3: Apply power to the Modular Drive.
Maximize the tractor speed using
the Control Module front panel
STEP 5: Reinstall endplate
SW 1 SW 2
in/min Down Down
cm/min Up Down
STEP 4: Set the speed display using
a small slotted screwdriver