BUG-O Systems Programmable Shape Machine - Manual (Page 15)

Edit the shape
You will have to make changes to the loaded DXF file to tell the machine how to cut it. At the minimum,
you will have to move it to or below the origin and rotate it properly. The select menu is at the top of
the screen, but can also be opened by right clicking on the drawing.
1. Remove any extra lines
a. Select‐>Select all
b. Edit DXF‐>Explode Selected Regions
c. Select‐>Select Single
d. Click each extra line that must be removed
e. Edit‐>Delete Selected Regions
f. Click OK
g. Select‐>Select All
h. Edit DXF‐>Join Selected Regions