Operation procedure – Campomatic KOR65S User Manual

Page 9

Advertising
background image

8

Plug power supply cord into 220~240V AC
50Hz power outlet.

After placing the food in a suitable container,
open the oven door and put it on the glass
tray. The glass tray and roller guide must
always be in place during cooking.

Close the door. Make sure that it is firmly
closed. When the oven door is closed, the
light turns off.

The oven door can be opened at any time
during operation by pulling the door handle.
The oven will automatically shut off. To restart
the oven, close the door and then touch the
START pad.

The oven automatically cooks on full power
unless set to a lower power level.

The display will show “ : 0” when the oven is
plugged in.

Time clock returns to the present time when
the cooking time ends.

When the START/PAUSE pad is touched
during the oven operation, the oven stops
cooking and all information retained. To erase
all information(except the present time), touch
the CLEAR/OFF pad once more.
If the oven door is opened during the oven
operation, all information is retained.

If the START pad is touched and the oven
does not operate, check the area between the
door and door seal for obstructions and make
sure the door is closed securely. The oven will
not start cooking until the door is completely
closed or the program has been reset.

OPERATION PROCEDURE

This section includes useful information about oven operation.

1

2

3

4

5

6

7

8

9

WATTAGE OUTPUT CHART

The power-level is set by touch the POWERLEVEL pad. The chart shows the display, the power level
and the percentage of power.

Make sure the oven is properly installed
and plugged into the electrical outlet.

once

P-HI

100%

twice

P-90

90%

3 times

P-80

80%

4 times

P-70

70%

5 times

P-60

60%

6 times

P-50

50%

7 times

P-40

40%

8 times

P-30

30%

9 times

P-20

20%

10 times

P-10

10%

11 times

P-00

0%

TOUCH THE POWER PAD

POWER LEVEL (DISPLAY)

APPROXIMATE PERCENTAGE

OF POWER

Advertising