Caple RFL70 User Manual

Page 4

Advertising
background image

Function introduction

Function introduction

1. Buttons

A. Hi Humidity mode
B. ON / OFF - System ON / OFF
C. ∧ temperature adjustment UP
D. ∨ temperature adjustment DOWN

2. Names of the display functions

1. Hi Humidity icon
2. Temperature area digital hose
3. Centigrade icon

3. Display control

· Initial power on: Full display for 3 seconds, at the same time sound the starting-up tone and displaying the default
temperature of 5℃.
· Display of normal operation:
Temperature display area: displays the set temperature, if a fault is detected the error code will flash and be displayed.
Hi Humidity icon: When in Hi Humidity mode, the light is on.
· Display control:
1. In the normal mode, if the door is not opened and there is no operation of any button, the screen will go out after 30
seconds;
2. If the door is open, the display screen will illuminate, and 30 seconds after the door is closed, the screen will go out;
3. When the “visible failure code” type failure occurs, the screen will automatically display once, and go out in 30 seconds (If
the buzzer is ringing continuously, press any button to cancel it).

4. User mode operation

·Startup and shutdown
In the ON mode, if the ON / OFF key (B-key) is pressed for 3 seconds, the OFF tone will sound with the OFF setting effective
immediately;
In the OFF mode, if the ON / OFF key (B-key) is pressed for 3 seconds, the ON tone will sound with the ON setting effective
immediately;
If the ON / OFF key is pressed continuously for 3 seconds to enable the OFF function, the display screen will go out, except for
the ON / OFF key (B-key), other keys will stop functioning, and the compressor, defrosting heater, door lamp and other loads
will immediately shut down; press the ON / OFF key continuously for 3 seconds to enable the ON function, and if it was
working in the Hi Humidity mode before shutdown, the display screen will show the Hi Humidity time initially set; otherwise,
the display screen will show the temperature previously set, and all the functions will work based on the settings before
shutdown.

The following function operations shall be completed in the ON status.

·High Humidity Mode
In the non-High Humidity mode, press the “Hi Humidity” key (A-key) for consecutive 3 seconds to have the “High Humidity”
mode effective, with the High Humidity icon lighting up.
In the High Humidity mode, press the “Hi Humidity” key (A-key) for consecutive 3 seconds to quit the High Humidity mode,
with the High Humidity icon going out.
After the High Humidity mode takes effect, the refrigerator will switch to the High Humidity working status to have its internal
relative humidity increased.

·Temperature setting
Press the temperature adjustment ∧ key (C-key) or ∨ key (D-key) to set the temperature. The temperature icon will flash

when setting the temperature, with the range between 2 and 8℃ (circulating adjustment unavailable); in 5 seconds, it will

quit to make the setting effective. (Within 5 seconds after setting of the temperature, you can also manually confirm the
setting state by pressing the A key or B key to have the setting effective).

5. Lighting control

The internal light will illuminate when the door is opened and automatically switch off when the door is closed.

6. Door-opening and door-open alarm control

When the door is opened a bell can be heard. If the refrigerator door is open for consecutive 120 seconds, it will sound an
alarm every 2 seconds until the door closed. Press any key to disable the door-open alarm.

7. Power-off memory and Initial power-up

·When the power supply is lost to this appliance has an internal memory that will remember the last settings before the power
was lost. When the refrigerator is switched back on the last settings will be selected.
·Initial power-up: The fridge has the default temperature of +5℃.

·Memory: It includes the set temperature, High Humidity mode and the cumulative working time of the compressor.
For example: If the power is cut off in Hi Humidity mode, it will be working based on the “Hi Humidity mode” after power-on.

4

5

Advertising