Caple RFL70 - Manual (Page 7)

Changing the door handing Changing the door handing
4. Reassemble the bottom hinge shaft: remove the original shaft of the hinge and relocated it as shown in the figure.
5. Reassemble the top hinge shaft: first remove the hinge shaft and screw this shaft from the other end of the screw hole.
6. Mount the left top hinge fixation column on the right.
7. Mount the bottom hinge on the right side of the cabinet.
8. First mount the top hinge in the corresponding shaft hole on the right side of the door upper cover, place the door body
on the bottom hinge, and press the top hinge into the hinge fixation column to fix the hinge.
9. Mount the roof decoration, the screw caps and the hinge end cap.
10 11
Bottom hinge