Caple C270GSS - Manual (Page 16)

16
Fig. 5.1
ELECTRONIC CLOCK
(fig. 5.1)
The electronic alarm is a device which
groups the functions of 24 hours clock
with illuminated display and 99 minutes
alarm.
Upon immediate connection of the oven
or after a blackout, three zeros will flash
on the programmer panel.
To set the hour it is necessary to push
the
button and then, within 7 sec-
onds, the or button until you have
set the exact hour.
An energy black-out makes the clock
go to zero.
ELECTRONIC ALARM
The alarm program consists only of a
buzzer which may be set for a maximum
period of 99 minutes.
To set the time, push the
or until
you obtain the desired time in the panel.
Having finished the setting, the
sym-
bol will be lighted and the countdown will
start immediately. At the end of the time,
the
symbol will be switched off and
an intermittent buzzer, during 7 minutes,
will go off; this can be stopped by press-
ing the
buttons.
To stop the alarm countdown in any
moment press the
and buttons
together and release the button first.
SETTING THE FREQUENCY OF THE ALARM
SOUND
The selection from 3 possibilities of
sound can be made by pressing the
button.
Electronic clock 55