Caple C232SS - Manual (Page 21)

21
Fig. 9.3
Fig. 9.2
A
Models with wire racks
– Assemble the wire racks to the oven
walls using the 2 screws (Fig. 9.2).
– In the models with catalytic panels
interpose the catalytic panels “A” with
the arrow up (Fig. 9.2).
– Slide in, on the guides, the shelf and
the tray (fig. 9.3).
The shelf must be fitted so that the
safety catch, which stops it sliding out,
faces the inside of the oven.
– To dismantle, operate in reverse order.
Fig. 9.1
OVEN FITTING OUT
Models with embossed cavity
The oven shelves are provided with a
security block to prevent accidental
extraction.
They must be inserted operating as per
figure 9.1.
To pull them out operate in the inverse
order.