Caple C232SS - Manual (Page 24)

24
1
2
Fig. 9.9
REPLACING THE OVEN LIGHT
Before any maintenance is started
involving electrical parts of the appliance,
it must be disconnected from the power
supply.
– Let the oven cavity and the heating
elements cool down;
– Switch off the electrical supply;
– Unscrew the protective cover (fig. 9.9);
– Unscrew and replace the bulb with a
new one suitable for high temperatures
(300°C) having the following specifica-
tions: 230-240V 50 Hz, 15W, E14
– Refit the protective cover
NOTE: Oven bulb replacement is not
covered by your guarantee
GREASE FILTER (some models only)
– Slide in the grease filter on the back
of the oven as in Fig. 9.8.
– Clean the filter after any cooking!
The grease filter can be removed for
cleaning and should be washed regu-
larly in hot soapy water (fig. 9.8).
– Always dry the filter properly before
fitting it back into the oven.
Fig. 9.8