Caple C813C - Manual (Page 5)

5
Using your Ceramic Hob
To start cooking
• After power on, the buzzer beeps once, all
the indicators light up for 1 second then go
out, indicating that the ceramic hob has
entered the state of standby mode.
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
3. Select a heat setting by touching the or
control.
• If you don’t choose a heat setting within 1
minute, the ceramic hob will automatically
switch off. You will need to start again at
step 1.
• You can modify the heat setting at any time
during cooking.
• By holding down either of these buttons, the
value will adjust up or down.
"-"
"+"
1. Touch the ON/OFF control.