CHIAYO QR-2000N User Manual
Page 3
ISO 9001｜ISO 14001｜OHSAS 18001
-2-
Connection
There are two audio connecters on the rear of this unit, Mic-level balanced and Line-level
unbalanced. Use shielded audio cable for the connection between this unit and the
mixer/amp or audio source. If the mixer/amp has a 1/4"(6.3mm) phone jack, connect a
cable from the 1/4"(6.3mm) unbalanced audio output from the receiver to the mixer/amp.
If the mixer has an XLR input, connect a cable from the balanced XLR audio output from
the receiver to the mixer input. This 1/4"(6.3mm) phone jack also serves as the audio
input when using TRANSMITTER or MP3 RECORDER PLAYER module.
Installation
For best operation, this unit should be at least 1m above the ground and at least 1m away
from a wall or metal surface to minimize reflection. The transmitter should also be at least
1m away from a wall or metal surface to minimize reflection. The transmitter should also
be at least 1m away from the receiver.
Rack mounting
QR-2000N has a half-19"-casing design. It can be cabinet-mounted with either 1 or 2 units.
Individual kits for mounting 1 or 2 QR-2000N are available and please refer to the
following assembly illustration.