頁面 2 – CHIAYO SDR-5932 User Manual
Page 2
1
7
7
1
2
2
3
3
4
4
5
5
6
6
8
9
10
11
12
13
14
15
16
Introduction
This system has 16 factory preprogrammed frequencies and is ready for immediate use
after switch-on. However, all frequency settings can be changed to suit your individual
needs, if required.
Basic configuration
1. SDR-5932 receiver
2. Handheld or beltpack transmitter *2pcs
3. Antenna *1 pair
4. Audio cable
5. Adaptor
6. Operation manual
Operation procedure
Please check the following listed before operating the receiver.
1. Both antennas have been installed.
2. The voltage output of the adaptor must be within the voltage input range used by the
receiver.
3. After the transmitter is turned on, the RF indicator will light up once signals received.
4. The channels of the receiver and transmitter must be the same.
5. While using the transmitter, the AF indicator will light up once audio signals received.
Parts and functions of SDR-5932 receiver
1. Power switch
2. RF diversity A/B indicator
3. RF indicator
4. 7-segment channel display
5. Channel up/down button
6. AF audio signal indicator
7. Volume control
8. Antenna B
9. Channel B balanced output (MIC OUT)
10. Channel B unbalanced output (LINE OUT)
11. Channel B squelch control
12. DC-in
13. Channel A balanced output (MIC OUT)
14. Channel A unbalanced output (LINE OUT)
15. Channel A squelch control
16. AC-in
17. Antenna A