CITIZEN E670 - Manual (Page 20)

40 41
(1) When the crown is pulled out to Position 2 (alarm time correction position), the
second hand stops at the ON or OFF position.
· Press button (A) to move the second hand to the alarm ON position.
· Each time button (A) is pressed, a confirmatory tone sounds and the alarm setting
switches between ON and OFF.
The setting can be changed while the crown is in the normal position or when pulled
out to Position 1.
(2) Turn the crown to set the correct alarm time while checking AM and PM with the 24
hour hand.
A Turning the crown to the right (by 1 click) causes the minute hand and hour hand
to advance by 1 minute.
B Turning the crown to the left (by 1 click) causes the minute hand and hour hand to
go back by 1 minute.
· Turning the crown continuously (rapidly by 2 clicks or more) causes the hour and
minute hands to move continuously.
· Turn the crown to the left or right to interrupt continuous movement of the hands.
(3) Push in the crown to Position 1 to return the watch to previously used mode.
(4) Return the crown to the normal position. This completes the procedure for setting
the alarm time.
9. Using the Alarm
· The alarm function uses a 24 hour clock. Once the alarm has been set, the alarm
sounds for 15 seconds when the set time is reached once a day.
· The alarm can be used in the time mode as well as the local time and calendar modes.
The alarm does not sound when the watch is in another mode.
Furthermore, press button (A) or (B) to stop the alarm tone from sounding before 15
seconds have elapsed.
<Setting the Alarm Time>
Pull the crown out to Position 1 and
turn to align the mode hand at [ALM]
(alarm).
· The hour hand and minute hand
display the previously set alarm
time.
60
120
100
90
140
180
70
75
80
250
TAC
HY
M ET
E R
RX
L
M
H
OFF
ON
NO
RADIO CONTROLLED
Mode switching
position
Alarm time
correction
position
Mode hand
Button (A)
Alarm ON/OFF position
Button (B)