CITIZEN H461 - Manual (Page 21)

43
<Canceling Time Difference>
Cancel the time difference by moving the hour hand in the opposite direction of that
when the time difference was set.
· When the time difference has been set ahead (forward direction): Turn back the
hour hand by the number of hours it was advanced.
· When the time difference has been set back (reverse direction): Advance the hour
hand by the number of hours it was turned back.
(1) Put the crown in the normal position and press button (B) once.
· The shorter end of the second hand moves to the SET position and the watch enters
the time difference correction mode.
(2) Turn the crown to move the hour hand until the shorter end of the second hand
points to ±0.
· When the crown is turned (one click) to the right, the hour hand turns forward
(clockwise) by one hour, and when turned (one click) to the left, the hour hand
turns backward (counter-clockwise) by one hour.
· The date setting changes if the hour hand is moved in the same direction as when
the time difference was set. Always make sure to move the hour hand in the
opposite direction in which the time difference returns to zero.
42
<Confirmation of Time Difference Setting>
· When the crown is put in the normal position and button (B) is pressed once, the
shorter end of the second hand moves to the SET or ±0 position to indicate the time
difference setting status.
Note: If the crown is turned while the time difference setting status is displayed, the
hour hand will move and a time difference will be set that causes the time to
change.
· To return to the normal display, either press button (B) again or simply wait for 10
seconds.
· When the shorter end of the second hand points to SET: Time difference is set
· When the shorter end of the second hand points to ±0: Time difference is not
set.