1 - prefix settings, 2 - suffix settings – Code CR2500 User Manual
Page 57

C004386_07_CR2500_ User_Manual -
51
Save Settings
6.1 - Prefix Settings
If you scan the following codes, you will lose any unsaved settings. Make sure to save settings on your reader before
scanning the prefix codes. If you scan more than one prefix you will receive each scanned prefix in your scanned data; (i.e.,
if you scan comma prefix twice, you will get two comma prefixes). Scan the following codes to set appropriate prefix:
Prefix - Comma
Prefix - Space
Prefix - Tab (Keyboard Mode)
Prefix - Tab
(Serial)
Prefix - Erase
Prefix - Carriage Return Line Feed
Note: If you require a special configuration, please contact Code at (801) 495-2200 or email [email protected].
6.2 - Suffix Settings
If you scan the following codes, you may lose your current settings. Make sure to save settings on your reader before
scanning the Suffix codes. If you scan more than one suffix you will receive each scanned suffix in your scanned data; (i.e.,
if you scan comma suffix twice, you will get two comma suffixes). Scan the following codes to set appropriate suffix:
Suffix - Carriage Return
Suffix - Comma
Suffix - Line Feed
Suffix - Carriage Return Line Feed Suffix - Space
Suffix - Enter
(Serial)
(Serial)
(Serial)
(Serial)
(Keyboard Mode)