Code CR2500 - Manual (Page 58)

C004386_07_CR2500_User_Manual - 52 Save Settings
6.2 - Suffix Settings
(continued)
Suffix - Tab Suffix - Tab Suffix - Erase
6.4 - Reader Text Commands
Enabling Reader Text Commands allows the CR2500 to accept text commands via RS-232 (Serial) or RF communication.
Scan the following codes to enable/disable reader text commands:
Reader Text Commands On Reader Text Commands Off - Default
6.3 - Erase Prefix and Suffix Settings
Scan the following codes to erase all prefix and suffix data.
Erase Prefix & Suffix Data
Note: Text commands can only be sent to the reader when it is active. See Reader-Host Interface Document for more
information.
(Keyboard Mode) (Serial)